Unified Strength Theory and Its Applications

Unified Strength Theory and Its Applications

Mao-Hong Yu

133,22 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
2012
Materia
Ingeniería mecánica
ISBN:
9783642623684
133,22 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

It has been ten years since I presented the paper entitled 'A new model and theory on yield and failure of materials under the complex stress state' at the Sixth Conference on Mechanical Behaviour of Materials held at Kyoto, Japan in 1991. The proceedings edited by Jono and Inoue were published by Pergamon Press in 1991. At that conference Professor Murakami and I were invited to act as the chairperson and co-chairperson of a session, and I presented the paper at another session. Few days before the conference, I had given a seminar regarding the tw- shear strength theory and the unified strength theory at Nagoya Technological University. These were the first two presentations of the unified strength theory, although I had completed the research of the unified strength theory in 1990. The paper 'Twin-shear strength theory and its generalization' was published in the English edition of Sciences in China, the top journal in China, in 1985. The th original generalized twin-shear strength theory was presented at the 16 International Theoretical and Applied Mechanics Congress held at Copenhagen in Denmark and MPA (MaterialPrüfungsAnstalt) at Stuttgart University, Germany in 1984. After this Congress I visited the MPA and School of Civil Engineering of Stuttgart University, and gave a seminar regarding the generalized twin-shear strength theory at MPA of Stuttgart University. Professor Otto Mohr (1835-1918) has had worked at the Stuttgart University. He was a very good professor, his lectures aroused great interest in his students.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
    Disponible

    334,82 €

  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    IYENGAR MADHUSUDAN / JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
    Disponible

    176,68 €

  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Advances in MEMS and Microfluidic Systems
    Microelectromechanical systems (MEMS) device applications are common in many areas. Micromirror arrays are used as video projectors; microsensors find their application for measuring acceleration, temperature, and pressure; and they can also be used in the medical field for measuring blood pressure. Microfluidics have also been widely employed in life sciences applications, suc...
    Disponible

    235,81 €

Otros libros del autor

  • Soil Mechanics
    Mao-Hong Yu
    This book focuses on the unified solutions and analysis for the problems in soil mechanics based on the unified strength theory, which is a new theory on the yield and failure of materials under multi-axial stresses. Then, it provides a system of yield and failure criteria adopted for most materials, from metallic materials to rocks, concretes, soils, polymers, etc. It includes...
    Disponible

    48,15 €

  • Unified Strength Theory and Its Applications
    Mao-Hong Yu
    This book thoroughly describes a theory concerning the yield and failure of materials under multi-axial stresses - the Unified Strength Theory, which was first proposed by the author and has been frequently quoted since. It provides a system of yield and failure criteria adopted for most materials, from metals to rocks, concretes, soils, and polymers. This new edition includes ...
    Disponible

    247,58 €

  • Unified Strength Theory and Its Applications
    Mao-Hong Yu
    This book thoroughly describes a theory concerning the yield and failure of materials under multi-axial stresses - the Unified Strength Theory, which was first proposed by the author and has been frequently quoted since. It provides a system of yield and failure criteria adopted for most materials, from metals to rocks, concretes, soils, and polymers. This new edition includes ...
    Disponible

    246,23 €

  • Generalized Plasticity
    Mao-Hong Yu
    ...
    Disponible

    209,29 €

  • Unified Strength Theory and Its Applications
    Mao-Hong Yu
    It has been ten years since I presented the paper entitled 'A new model and theory on yield and failure of materials under the complex stress state' at the Sixth Conference on Mechanical Behaviour of Materials held at Kyoto, Japan in 1991. The proceedings edited by Jono and Inoue were published by Pergamon Press in 1991. At that conference Professor M...
    Disponible

    131,87 €