Fracture Mechanics of Ceramics

Fracture Mechanics of Ceramics

A. G. Evans / D. P. H. Hasselman / R. C. Bradt

68,54 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
2013
Materia
Ingeniería mecánica
ISBN:
9781461570288
68,54 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

These volumes, 7 and 8, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia on June 19, 20 and 21, 1985. These proceedings constitute the fourth pair of volumes of a continuing series of conferences. The theme of this conference, as the previous three, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the EXXON Foundation, the Army Research Office, the National Science Foundation, and the Office of Naval Research. Without their support, this conference simply would not have been possible. The suggestions of Drs. J. C. Hurt, R. C. Pohanka, and L. Toth were particularly helpful in assuring the' success of this symposium. Special appreciation is extended to Professor J. I. Robertson, C. P. Miles Professor of History, whose presentation following the banquet on the American Civil War was very well received by the audience. Finally, we wish to also thank our joint secretaries, especially Karen Snider, for their patience and help in finally bringing these proceedings to press.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
    Disponible

    334,82 €

  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    IYENGAR MADHUSUDAN / JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
    Disponible

    176,68 €

  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Advances in MEMS and Microfluidic Systems
    Microelectromechanical systems (MEMS) device applications are common in many areas. Micromirror arrays are used as video projectors; microsensors find their application for measuring acceleration, temperature, and pressure; and they can also be used in the medical field for measuring blood pressure. Microfluidics have also been widely employed in life sciences applications, suc...
    Disponible

    235,81 €

Otros libros del autor

  • Fracture Mechanics of Ceramics
    A. G. Evans / D. P. H. Hasselman / R. C. Bradt
    These volumes, 5 and 6, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at The Pennsylvania State University, University Park, PA on July 15, 16, and 17, 1981. These proceedings constitute the third pair of volumes of a con­ tinuing series of conferences. Vo...
    Disponible

    143,18 €