Computational Methods and Experimental Measurements

Computational Methods and Experimental Measurements

 

132,09 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
2014
Materia
Ingeniería mecánica
ISBN:
9783662063774
132,09 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

This book contains the edited proceedings of the 2nd Internat­ ional Conference on Computationa1 Methods and Experimental Meas­ urements held on board the QE2 liner from 27th June to 2nd Ju1y 1984. The meeting was sponsored by the International Society for Computationa1 Methods in Engineering and the Department of Civi1 Engineering, Southampton University and organized by the Computationa1 Mechanics Institute of Southampton, England. The QE2 provided an ideal environment for the international meeting and one that was equa11y convenient for the USA and European re­ searchers and offered a 10cation propitious to the interchange of ideas and c10se contact between participants. This book covers a wide range of different topics in Computat­ iona1 Methods and Experimental Measurements with the main empha­ sis on the re1ationships between experimental and ana1ytica1 5- utions. The first section deals with fluid dynamics problems and a 1arge number of app1ications. Section 2 considers geophysica1 fluid dynamics and describes some atmospheric models and their re1ated problems. Water resources are dealt with in Section 3 which describes some app1ications of porous media f10w and sur­ face water mode11ing. Wave interaction problems are described in Section 4 and Section 5 considers some important heat transfer app1ications. Other sections - 6 & 7 - study problems re1ated to stress analysis and structura1 app1ications. Vibration pro­ blems are becoming of fundamental importance in engineering and part of the Conference Proceedings - Section 8 - are dedicated to the study of experimental and computational models.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    IYENGAR MADHUSUDAN / JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Advances in MEMS and Microfluidic Systems
    Microelectromechanical systems (MEMS) device applications are common in many areas. Micromirror arrays are used as video projectors; microsensors find their application for measuring acceleration, temperature, and pressure; and they can also be used in the medical field for measuring blood pressure. Microfluidics have also been widely employed in life sciences applications, suc...
    Disponible

    235,81 €