Boiler Operators Handbook

Boiler Operators Handbook

Nifes Ltd

66,91 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
1981
Materia
Ingeniería mecánica
ISBN:
9780860102519
66,91 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

The popularity of the Boiler Operators Han~ook has prompted the issue of a revised edition. Other than a relatively small number of developments, essen­ tially associated with solid fuel firing methods using the fluidised bed technique, no radical changes have occurred since the first edition of the Handbook was issued in 1969. In revising a work of this kind there is a great temptation to omit practices that are now less common in the UK. In view of the enormous pressure on Global energy resources, however, the chapters dealing in methods of hand-firing have been retained in the hope that they may be of value to those in the less developed nations where energy problems are infinitely greater than ours. High combustion intensity boilers, commonly known as Package Boilers, of the Shell Construction design, have now much greater steam output than their predecessors and the need for high levels of maintenance and operating skills remain as essential as when this group of boilers first appeared on the market. Also the standard of water treatment required is probably higher than the Operator has been accustomed to. The Health and Safety at Work Act re-emphasised the continued need for adherence to the principles that ensure a pressure vessel be maintained in a safe condition at all times. Accordingly the revised edition of the Boiler Operators Handbook has en­ larged its sections on Safety and the Clean Air Act.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    IYENGAR MADHUSUDAN / JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Advances in MEMS and Microfluidic Systems
    Microelectromechanical systems (MEMS) device applications are common in many areas. Micromirror arrays are used as video projectors; microsensors find their application for measuring acceleration, temperature, and pressure; and they can also be used in the medical field for measuring blood pressure. Microfluidics have also been widely employed in life sciences applications, suc...
    Disponible

    235,81 €