Aeolian Grain Transport

Aeolian Grain Transport

 

67,71 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
1991
Materia
Ingeniería mecánica
ISBN:
9783211822746
67,71 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

Wind erosion has such a pervasive influence on environmental and agricultural matters that academic interest in it has been continuous for several decades. However, there has been a tendency for the resulting publications to be scattered widely in the scientific litera­ ture and consequently to provide a less coherent resource than might otherwise be hoped for. In particular, cross-reference between the literature on desert and coastal morphology, on the deterioration of wind affected soils, and on the process mechanics of the grain/air­ flow system has been disappointing. A successful workshop on 'The Physics of Blown Sand', held in Aarhus in 1985, took a decisive step in collecting a research community with interests spanning geomorphology and grain/wind process mechanics. The identification of that Community was reinforced by the Binghampton Symposium on Aeolian Geomorphology in 1986 and has been fruitful in the development of a number of international collaborations. The objectives of the pre­ sent workshop, which was supported by a grant from the NATO Scientific Affairs Division, were to take stock of the progress in the five years to 1990 and to extend the scope of the community to include soil deterioration (and dust release) and those beach processes which link with aeolian activity on the coast.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    IYENGAR MADHUSUDAN / JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Advances in MEMS and Microfluidic Systems
    Microelectromechanical systems (MEMS) device applications are common in many areas. Micromirror arrays are used as video projectors; microsensors find their application for measuring acceleration, temperature, and pressure; and they can also be used in the medical field for measuring blood pressure. Microfluidics have also been widely employed in life sciences applications, suc...
    Disponible

    235,81 €