Inicio > Tecnología, ingeniería, agricultura > Tecnología: cuestiones generales > Ingeniería: general > Study of the quality of parts obtained in an optimized drilling process
Study of the quality of parts obtained in an optimized drilling process

Study of the quality of parts obtained in an optimized drilling process

André de Lima

38,24 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2025
Materia
Ingeniería: general
ISBN:
9786208642587
38,24 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)
Sobre IBD

The main objective of this work is to evaluate macro and micro quality determinants - MmdQ, (roughness, surface and sub-surface layer integrity, shape and dimensional errors, respectively) in parts obtained from the drilling process carried out under optimized process conditions and without cooling (dry cutting). The aim is also to analyze the influence that these MmdQ can have on the occurrence of possible failures in the use of the parts.

Artículos relacionados

  • An Engineer’s Alphabet
    Henry Petroski
    ...
  • Conduct of Vessels Underway
    Captain Mehrdad Behforouzi
    This book results from sailing for 25 years at sea at different ranks, including 15 years of command and more than 20 years of teaching in maritime universities, colleges, and simulators. Lack of knowledge and misinterpretation of the rules are the reasons for Most collisions at sea. The author tried to interpret the rules of the road practically to be understandable both in th...
    Disponible

    87,94 €

  • Robotics- An Introduction
    R Manikandan
    In this book the principles and basic concepts of Robotics and its components are briefed. The readers will understand the design and implementation of robot applications and their relationship to other automated technologies. The basis of machine vision and its application in robotics are briefed. The concept of end effectors, basic programming in Robots and a few real time ap...
    Disponible

    75,58 €

  • Nonnegative and Compartmental Dynamical Systems
    Qing Hui / VijaySekhar Chellaboina / Wassim M. Haddad
    This comprehensive book provides the first unified framework for stability and dissipativity analysis and control design for nonnegative and compartmental dynamical systems, which play a key role in a wide range of fields, including engineering, thermal sciences, biology, ecology, economics, genetics, chemistry, medicine, and sociology. Using the highest standards of exposition...
  • Steady Aircraft Flight and Performance
    N. Harris McClamroch
    This undergraduate textbook offers a unique introduction to steady flight and performance for fixed-wing aircraft from a twenty-first-century flight systems perspective. Emphasizing the interplay between mathematics and engineering, it fully explains the fundamentals of aircraft flight and develops the basic algebraic equations needed to obtain the conditions for gliding flight...
  • Capacidade Do Fungo Pleurotus Ostreatus (Cogumelo Shimeji) Na Biorremediação De Solos Contaminados Com Chumbo (Pb)
    Duilio Pereira
    O Uso De Biorremediação Está Ganhando Interesse, E O Objetivo Da Presente Investigação É Usar O Fungo Pleurotus Ostreatus Para Remediar Solos Contaminados Com Chumbo (Pb) E Serragem Como Um Complemento, Um Nutriente Que Permite Maior Eficiência E Velocidade De Crescimento. Para Delinear Esta Pesquisa, Foram Testados Três Repetições E Três Tratamentos E Unidade De Uma Placa Como...
    Disponible

    11,96 €

Otros libros del autor

  • Badanie jakości części uzyskanych w zoptymalizowanym procesie wiercenia
    André de Lima
    Głównym celem niniejszej pracy jest ocena makro i mikro wyznaczników jakości - MmdQ, (odpowiednio chropowatości, integralności warstwy powierzchniowej i podpowierzchniowej, błędów kształtu i wymiarów) w częściach uzyskanych w procesie wiercenia przeprowadzonym w zoptymalizowanych warunkach procesu i bez chłodzenia (cięcie na sucho). Celem jest również analiza wpływu, jaki te Mm...
    Disponible

    38,24 €

  • Studie über die Qualität der in einem optimierten Bohrverfahren hergestellten Teile
    André de Lima
    Das Hauptziel dieser Arbeit ist die Bewertung der Makro- und Mikroqualitätsfaktoren - MmdQ - (Rauheit, Oberflächen- und Unterschichtintegrität bzw. Form- und Maßfehler) bei Teilen, die im Bohrprozess unter optimierten Prozessbedingungen und ohne Kühlung (Trockenschnitt) hergestellt werden. Ziel ist es auch, den Einfluss zu analysieren, den diese MmdQ auf das Auftreten möglicher...
    Disponible

    38,30 €

  • Etude de la qualité des pièces obtenues dans un processus de perçage optimisé
    André de Lima
    L’objectif principal de ce travail est d’évaluer les macro et micro déterminants de la qualité - MmdQ, (rugosité, intégrité des couches de surface et de sub-surface, erreurs de forme et de dimension, respectivement) dans les pièces obtenues par le processus de perçage effectué dans des conditions de processus optimisées et sans refroidissement (coupe à sec). L’objectif est égal...
    Disponible

    38,30 €

  • Studio della qualità dei pezzi ottenuti con un processo di foratura ottimizzato
    André de Lima
    L’obiettivo principale di questo lavoro è valutare i determinanti macro e micro della qualità - MmdQ, (rugosità, integrità dello strato superficiale e sub-superficiale, errori di forma e dimensionali, rispettivamente) nei pezzi ottenuti dal processo di foratura eseguito in condizioni di processo ottimizzate e senza raffreddamento (taglio a secco). L’obiettivo è anche quello di ...
    Disponible

    38,24 €