Simulação do processo de soldadura TIG

Simulação do processo de soldadura TIG

P. Ravinder Reddy

74,82 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2026
Materia
Ingeniería: general
ISBN:
9786209836299
74,82 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Kálamo Books
  • Librería Elías (Asturias)
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

A soldadura TIG é um dos processos de soldadura mais importantes necessários para o desenvolvimento e fabrico de componentes de reatores de fusão. Os principais componentes desenvolvidos para utilização na construção utilizam vários tipos de aço inoxidável, como SS304, SS316, SS316L e alguns materiais especiais de grau nuclear, com espessuras que variam entre 5 mm e 60 mm. A união e soldadura destes materiais têm um impacto significativo na vida útil das estruturas do tokamak, uma vez que estas são submetidas a condições rigorosas, tais como efeitos térmicos, mecânicos e de radiação nuclear. Por conseguinte, cada subsistema deve ser cuidadosamente fabricado de acordo com o processo recomendado e as propriedades dos materiais exigidas. O principal método para os componentes propostos é a soldadura TIG. O presente trabalho tem como objetivo a seleção e otimização dos parâmetros do processo TIG, com foco nos parâmetros de qualidade da amostra de soldadura, distribuição de temperatura, tensões residuais e deformação da soldadura. Foi selecionada uma placa de SS316 com 10 mm de espessura e dimensões de 300 x 150 mm, soldada por TIG, para investigação experimental e combinação com análise FEM utilizando o software ANSYS, a fim de prever a variação de temperatura e as tensões térmicas com parâmetros variáveis de espessura da placa, tensão e eficiência.

Artículos relacionados

  • An Engineer’s Alphabet
    Henry Petroski
    ...
  • Conduct of Vessels Underway
    Captain Mehrdad Behforouzi
    This book results from sailing for 25 years at sea at different ranks, including 15 years of command and more than 20 years of teaching in maritime universities, colleges, and simulators. Lack of knowledge and misinterpretation of the rules are the reasons for Most collisions at sea. The author tried to interpret the rules of the road practically to be understandable both in th...
    Disponible

    87,94 €

  • Robotics- An Introduction
    R Manikandan
    In this book the principles and basic concepts of Robotics and its components are briefed. The readers will understand the design and implementation of robot applications and their relationship to other automated technologies. The basis of machine vision and its application in robotics are briefed. The concept of end effectors, basic programming in Robots and a few real time ap...
    Disponible

    75,58 €

  • Nonnegative and Compartmental Dynamical Systems
    Qing Hui / VijaySekhar Chellaboina / Wassim M. Haddad
    This comprehensive book provides the first unified framework for stability and dissipativity analysis and control design for nonnegative and compartmental dynamical systems, which play a key role in a wide range of fields, including engineering, thermal sciences, biology, ecology, economics, genetics, chemistry, medicine, and sociology. Using the highest standards of exposition...
  • Steady Aircraft Flight and Performance
    N. Harris McClamroch
    This undergraduate textbook offers a unique introduction to steady flight and performance for fixed-wing aircraft from a twenty-first-century flight systems perspective. Emphasizing the interplay between mathematics and engineering, it fully explains the fundamentals of aircraft flight and develops the basic algebraic equations needed to obtain the conditions for gliding flight...
  • Capacidade Do Fungo Pleurotus Ostreatus (Cogumelo Shimeji) Na Biorremediação De Solos Contaminados Com Chumbo (Pb)
    Duilio Pereira
    O Uso De Biorremediação Está Ganhando Interesse, E O Objetivo Da Presente Investigação É Usar O Fungo Pleurotus Ostreatus Para Remediar Solos Contaminados Com Chumbo (Pb) E Serragem Como Um Complemento, Um Nutriente Que Permite Maior Eficiência E Velocidade De Crescimento. Para Delinear Esta Pesquisa, Foram Testados Três Repetições E Três Tratamentos E Unidade De Uma Placa Como...

Otros libros del autor

  • Simulation du procédé de soudage TIG
    P. Ravinder Reddy
    Le soudage TIG est l’un des principaux procédés de soudage requis pour le développement et la fabrication des composants des réacteurs à fusion. Les principaux composants développés pour la construction utilisent différentes nuances d’acier inoxydable, telles que SS304, SS316, SS316L, ainsi que certains matériaux spéciaux de qualité nucléaire, dont les épaisseurs varient de 5 m...
    Disponible

    73,52 €

  • Symulacja procesu spawania metodą TIG
    P. Ravinder Reddy
    Spawanie metodą TIG jest jednym z kluczowych procesów spawalniczych niezbędnych do opracowania i produkcji elementów reaktorów termojądrowych. Główne elementy przeznaczone do budowy wykorzystują różne gatunki stali nierdzewnej, takie jak SS304, SS316, SS316L, a także niektóre specjalne materiały klasy jądrowej o grubościach od 5 mm do 60 mm. Łączenie i spawanie tych materiałów ...
    Disponible

    74,82 €

  • Simulation des WIG-Schweißprozesses
    P. Ravinder Reddy
    Das WIG-Schweißen ist eines der wichtigsten Schweißverfahren, das für die Entwicklung und Fertigung von Komponenten für Fusionsreaktoren erforderlich ist. Die für den Bau entwickelten Hauptkomponenten bestehen aus verschiedenen Edelstahlsorten wie SS304, SS316, SS316L sowie einigen speziellen Werkstoffen in nuklearer Qualität mit Dicken zwischen 5 mm und 60 mm. Die Verbindung u...
    Disponible

    74,82 €

  • Simulazione del processo di saldatura TIG
    P. Ravinder Reddy
    La saldatura TIG è uno dei processi di saldatura fondamentali per lo sviluppo e la fabbricazione dei componenti dei reattori a fusione. I principali componenti sviluppati per la costruzione utilizzano vari tipi di acciaio inossidabile, quali SS304, SS316, SS316L, e alcuni materiali speciali per uso nucleare con spessori variabili da 5 mm a 60 mm. L’unione e la saldatura dei mat...
    Disponible

    74,82 €

  • Analyse thermique et de la circulation d’air des abris à l’aide de la CFD
    P. Ravinder Reddy
    Les abris sont des structures d’habitation utilisées par l’armée pour s’abriter sur le terrain. Ces abris sont montés sur des véhicules militaires qui sont soumis à des charges statiques, dynamiques et thermiques dues au transport sur tous types de terrains. Les abris sont soumis à des charges thermiques variables en fonction des températures extérieures saisonnières et comport...
    Disponible

    73,26 €

  • Wärme- und Luftstromanalyse von Schutzhütten mittels CFD
    P. Ravinder Reddy
    Die Schutzhütten sind wie Unterkonstruktionen, die vom Militär zur Unterbringung im Gelände genutzt werden. Diese Schutzhütten werden auf Militärfahrzeugen montiert, die aufgrund des Transports in jeglichem Gelände statischen, dynamischen und thermischen Belastungen ausgesetzt sind. Die Unterkünfte sind aufgrund saisonaler Außentemperaturen unterschiedlichen thermischen Belastu...
    Disponible

    71,96 €