Second-Generation HTS Conductors

Second-Generation HTS Conductors

Amit Goyal

205,98 €
IVA incluido
Consulta disponibilidad
Editorial:
Springer Nature B.V.
Año de edición:
2005
Materia
Ingeniería: general
ISBN:
9781402081170

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

Thediscoveryofhightemperaturesuperconductors(HTS)in 1986bytwoIBM scientists led to an unprecedented explosion of research and development efforts world-wide because of the signi?cant potential for practical applications offered by these materials. However, the early euphoria created by the exciting prospects was dampenedby the dauntingtask of fabricating these materials into useful forms with acceptablesuperconductingproperties. Progresstowardsthisgoalhasbeen hindered by many intrinsic materials problems, such as weak-links, ?ux-creep, and poor - chanicalproperties. TheearlieststudiesofcriticalcurrentdensityJ inHTSmaterialsrevealedthatfor c apolycrystallinematerialcontainingadistributionofgrainboundariesismuchlower than that for a single crystal. High angle grain boundariesact as Josephson coupled weak-links leading to a signi?cant ?eld-dependent suppression of the supercurrent acrosstheboundary. Forcleanstoichiometricboundaries,thegrainboundarycritical currentdensity dependsprimarilyonthe grainboundarymisorientation. The dep- denceof J (gb)onmisorientationanglehasbeendeterminedYBa O Cu (YBCO) c 2 3 7?? in boundary types which can be formed in epitaxial ?lms on bicrystal substrates. Theseinclude[001]tilt,[100]tilt,and[100]twistboundaries. Ineachcasehighangle boundarieswerefoundtobeweak-linked. Theseexperimentshavealsobeenextended to arti?cially fabricated [001] tilt bicrystals in Tl Ba CaCu O,Tl Ba Ca Cu O , 2 2 2 8 2 2 2 3 x TlBa Ca Cu O (Tl-1223) and Nd Ce CuO . In each case it was found that, 2 2 3 x 1. 85 0. 15 4 as in YBCO, J depends strongly on grain boundary misorientation angle. Data on c currenttransmissionacrossarti?ciallyfabricatedgrainboundariesinBi-2212also- dicate that most large angle [001] tilt and [001] twist boundaries are weak links. It is likely that the variation in J with grain boundary misorientation is similar in all c high-T superconductors. Hence,thelow J observedinrandomlyorientedpolycr- c c tallineHTScanbeunderstoodonthebasisthatthepopulationoflowangleboundaries issmallandthatfrequenthighangleboundariesimpedelong-rangecurrent?ow. - ingconventionalprocessingtechniques,threeHTSmaterialsweresuccessfullyfab- catedinpolycrystallineformwithmodestJ ’s. ThesearetheBi-2223powder-in-tube c conductors,theTl-1223spray-pyrolyzed?lmsandtheBi-2212melt-processedthick ?lms. Thesethreetypesofconductorscomprisedthe First-GenerationHTScond- torsorwires.

Artículos relacionados

  • Recent Advances in Energy Storage Materials and Devices
    Li Lu
    In the Li-ion battery, Ions’ transportation between positive and negative electrodes relies on organic-based electrolyte with a low flammable point. Therefore, use of this type of electrolyte lead to a lot of safety issues. In addition, the potential window of commercially available organic electrolyte is only up to about 4.5V, resulting that those cathode materials with high p...
    Disponible

    132,86 €

  • Surface Engineering Techniques and Applications
    Loredana Santo / Paulo Davim
    Surface engineering includes many facets of materials science that help regulate the function, quality, and safety of products such as automotive, textile, and electronic materials. New technologies are developing to help enhance the surface performance. Surface Engineering Techniques and Applications: Research Advancements provides recent developments in surface engineering te...
  • Technological Applications of Nano-Hybrid Composites
    In the midst of our contemporary and swiftly evolving technological landscape, the pressing issue lies in the need for multifunctional materials that can transcend traditional boundaries and fuel innovation across diverse industries. This demand arises from the relentless pursuit of greater performance, efficiency, and adaptability in sectors ranging from electronics to aerospa...
  • Rheology Step 1
    Annika Sahlström
    This book is covering the basics of rheology and is based on knowledge gained during many years of both practical and theoretical work with rheological challenges in most industrial branches. It serves to help the reader to gain the understanding needed to plan, perform and interpret rheological measurements to study material properties at rest and during flow. This book is bas...
    Disponible

    72,86 €

  • Advancements in Powder Metallurgy
    Advancements in Powder Metallurgy: Processing, Applications, and Properties addresses a critical issue in academic scholarship by providing a comprehensive resource that has been lacking in the field. Existing books often fall short by merely covering the basics of powder preparation, sintering methods, and general applications, leaving scholars with a limited understanding of ...
  • Advancements in Powder Metallurgy
    Advancements in Powder Metallurgy: Processing, Applications, and Properties addresses a critical issue in academic scholarship by providing a comprehensive resource that has been lacking in the field. Existing books often fall short by merely covering the basics of powder preparation, sintering methods, and general applications, leaving scholars with a limited understanding of ...
    Disponible

    274,93 €

Otros libros del autor

  • Second-Generation HTS Conductors
    Amit Goyal
    Methods to Produce Biaxially Textured Substrates.- IBAD Template Films for HTS Coated Conductors.- Epitaxial Superconductors on Rolling-Assisted-Biaxially-Textured-Substrates (RABiTS).- Inclined Substrate Deposition.- ISD by Thermal Evaporation.- Methods of YBa2Cu3O7?? Deposition and Related Issues.- Pulsed Laser Deposition of YBa2Cu2O7?? for Coated Conductor Applications: Curr...
    Disponible

    244,22 €