Inicio > Tecnología, ingeniería, agricultura > Tecnología: cuestiones generales > Ingeniería: general > FABRICATION, MECHANICAL CHARACTERIZATION & STATISTICAL OPTIMIZATION
FABRICATION, MECHANICAL CHARACTERIZATION & STATISTICAL OPTIMIZATION

FABRICATION, MECHANICAL CHARACTERIZATION & STATISTICAL OPTIMIZATION

K. Dharma Reddy / T. LAKSHMANNA

66,85 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2026
Materia
Ingeniería: general
ISBN:
9786209512322
66,85 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Kálamo Books
  • Librería Elías (Asturias)
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

This project focuses on the fabrication and mechanical characterization of Aluminium 7075 metal matrix composites reinforced with copper, silicon carbide, and fly ash using the stir casting technique. Aluminium 7075 is selected as the base material due to its high strength-to-weight ratio and good mechanical properties, while copper, silicon carbide, and fly ash are used as reinforcements to improve strength, hardness, and wear resistance. The composites are fabricated by varying reinforcement combinations and cast into flat plate specimens. After casting, machining is carried out to obtain standard test specimens. Mechanical properties such as tensile strength and hardness are evaluated. Design of Experiments using the Taguchi method is applied to optimize process parameters, and Analysis of Variance (ANOVA) is used to identify the significant factors affecting the mechanical properties. The results demonstrate that the addition of reinforcements significantly enhances the mechanical performance of Aluminium 7075 composites, making them suitable for lightweight structural and automotive applications.

Artículos relacionados

  • An Engineer’s Alphabet
    Henry Petroski
    ...
  • Conduct of Vessels Underway
    Captain Mehrdad Behforouzi
    This book results from sailing for 25 years at sea at different ranks, including 15 years of command and more than 20 years of teaching in maritime universities, colleges, and simulators. Lack of knowledge and misinterpretation of the rules are the reasons for Most collisions at sea. The author tried to interpret the rules of the road practically to be understandable both in th...
    Disponible

    87,94 €

  • Robotics- An Introduction
    R Manikandan
    In this book the principles and basic concepts of Robotics and its components are briefed. The readers will understand the design and implementation of robot applications and their relationship to other automated technologies. The basis of machine vision and its application in robotics are briefed. The concept of end effectors, basic programming in Robots and a few real time ap...
    Disponible

    75,58 €

  • Nonnegative and Compartmental Dynamical Systems
    Qing Hui / VijaySekhar Chellaboina / Wassim M. Haddad
    This comprehensive book provides the first unified framework for stability and dissipativity analysis and control design for nonnegative and compartmental dynamical systems, which play a key role in a wide range of fields, including engineering, thermal sciences, biology, ecology, economics, genetics, chemistry, medicine, and sociology. Using the highest standards of exposition...
  • Steady Aircraft Flight and Performance
    N. Harris McClamroch
    This undergraduate textbook offers a unique introduction to steady flight and performance for fixed-wing aircraft from a twenty-first-century flight systems perspective. Emphasizing the interplay between mathematics and engineering, it fully explains the fundamentals of aircraft flight and develops the basic algebraic equations needed to obtain the conditions for gliding flight...
  • Capacidade Do Fungo Pleurotus Ostreatus (Cogumelo Shimeji) Na Biorremediação De Solos Contaminados Com Chumbo (Pb)
    Duilio Pereira
    O Uso De Biorremediação Está Ganhando Interesse, E O Objetivo Da Presente Investigação É Usar O Fungo Pleurotus Ostreatus Para Remediar Solos Contaminados Com Chumbo (Pb) E Serragem Como Um Complemento, Um Nutriente Que Permite Maior Eficiência E Velocidade De Crescimento. Para Delinear Esta Pesquisa, Foram Testados Três Repetições E Três Tratamentos E Unidade De Uma Placa Como...

Otros libros del autor

  • Fabrication, Caractérisation Mécanique et Optimisation Statistique
    K. Dharma Reddy / T. LAKSHMANNA
    Ce projet porte sur la fabrication et la caractérisation mécanique de composites à matrice métallique en aluminium 7075 renforcés par du cuivre, du carbure de silicium et des cendres volantes à l’aide de la technique de coulée par agitation. L’aluminium 7075 est choisi comme matériau de base en raison de son rapport résistance/poids élevé et de ses bonnes propriétés mécaniques,...
    Disponible

    66,99 €

  • Fabrico, Caracterização Mecânica e Optimização Estatística
    K. Dharma Reddy / T. LAKSHMANNA
    Este projeto centra-se no fabrico e na caraterização mecânica de compósitos de matriz metálica de alumínio 7075 reforçados com cobre, carboneto de silício e cinzas volantes, utilizando a técnica de fundição por agitação. O alumínio 7075 é selecionado como material de base devido à sua elevada relação resistência/peso e boas propriedades mecânicas, enquanto o cobre, o carboneto ...
    Disponible

    66,99 €

  • Produkcja, Charakterystyka Mechaniczna i Optymalizacja Statystyczna
    K. Dharma Reddy / T. LAKSHMANNA
    Niniejszy projekt koncentruje się na wytwarzaniu i charakterystyce mechanicznej kompozytów o osnowie metalowej z aluminium 7075 wzmocnionych miedzią, węglikiem krzemu i popiołem lotnym przy użyciu techniki odlewania z mieszaniem. Aluminium 7075 zostało wybrane jako materiał bazowy ze względu na wysoki stosunek wytrzymałości do masy i dobre właściwości mechaniczne, podczas gdy m...
    Disponible

    66,99 €

  • Fabbricazione, Caratterizzazione Meccanica e Ottimizzazione Statistica
    K. Dharma Reddy / T. LAKSHMANNA
    Questo progetto si concentra sulla fabbricazione e sulla caratterizzazione meccanica di compositi a matrice metallica di alluminio 7075 rinforzati con rame, carburo di silicio e ceneri volanti utilizzando la tecnica dello stir casting. L’alluminio 7075 è stato scelto come materiale di base per il suo elevato rapporto resistenza/peso e le sue buone proprietà meccaniche, mentre i...
    Disponible

    66,99 €

  • HERSTELLUNG, MECHANISCHE CHARAKTERISIERUNG UND STATISTISCHE OPTIMIERUNG
    K. Dharma Reddy / T. LAKSHMANNA
    Dieses Projekt befasst sich mit der Herstellung und mechanischen Charakterisierung von Metallmatrix-Verbundwerkstoffen aus Aluminium 7075, die mit Kupfer, Siliziumkarbid und Flugasche im Rührgießverfahren verstärkt sind. Aluminium 7075 wird aufgrund seines hohen Festigkeits-/Gewichtsverhältnisses und seiner guten mechanischen Eigenschaften als Grundmaterial ausgewählt, während ...
    Disponible

    67,05 €