Inicio > Tecnología, ingeniería, agricultura > Tecnología: cuestiones generales > Ingeniería: general > Design and Development of Fatigue Testing Machine for Leaf Spring
Design and Development of Fatigue Testing Machine for Leaf Spring

Design and Development of Fatigue Testing Machine for Leaf Spring

Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar

64,30 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2025
Materia
Ingeniería: general
ISBN:
9786202528979
64,30 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)
Sobre IBD

Fatigue is the failure of a material or machine component caused by repeated or fluctuating stress, typically beginning with a tiny, undetectable crack at a point of discontinuity like a notch, hole, or machining mark. As the crack grows, stress concentration increases, accelerating the failure. Springs, including leaf springs, absorb shocks and vibrations through elastic deformation. In this study, fatigue testing of a leaf spring was conducted using a slider-crank mechanism based on impactor theory, with deflection readings measured using a strain gauge and load cell.

Artículos relacionados

  • An Engineer’s Alphabet
    Henry Petroski
    ...
  • Conduct of Vessels Underway
    Captain Mehrdad Behforouzi
    This book results from sailing for 25 years at sea at different ranks, including 15 years of command and more than 20 years of teaching in maritime universities, colleges, and simulators. Lack of knowledge and misinterpretation of the rules are the reasons for Most collisions at sea. The author tried to interpret the rules of the road practically to be understandable both in th...
    Disponible

    87,94 €

  • Robotics- An Introduction
    R Manikandan
    In this book the principles and basic concepts of Robotics and its components are briefed. The readers will understand the design and implementation of robot applications and their relationship to other automated technologies. The basis of machine vision and its application in robotics are briefed. The concept of end effectors, basic programming in Robots and a few real time ap...
    Disponible

    75,58 €

  • Nonnegative and Compartmental Dynamical Systems
    Qing Hui / VijaySekhar Chellaboina / Wassim M. Haddad
    This comprehensive book provides the first unified framework for stability and dissipativity analysis and control design for nonnegative and compartmental dynamical systems, which play a key role in a wide range of fields, including engineering, thermal sciences, biology, ecology, economics, genetics, chemistry, medicine, and sociology. Using the highest standards of exposition...
  • Steady Aircraft Flight and Performance
    N. Harris McClamroch
    This undergraduate textbook offers a unique introduction to steady flight and performance for fixed-wing aircraft from a twenty-first-century flight systems perspective. Emphasizing the interplay between mathematics and engineering, it fully explains the fundamentals of aircraft flight and develops the basic algebraic equations needed to obtain the conditions for gliding flight...
  • Capacidade Do Fungo Pleurotus Ostreatus (Cogumelo Shimeji) Na Biorremediação De Solos Contaminados Com Chumbo (Pb)
    Duilio Pereira
    O Uso De Biorremediação Está Ganhando Interesse, E O Objetivo Da Presente Investigação É Usar O Fungo Pleurotus Ostreatus Para Remediar Solos Contaminados Com Chumbo (Pb) E Serragem Como Um Complemento, Um Nutriente Que Permite Maior Eficiência E Velocidade De Crescimento. Para Delinear Esta Pesquisa, Foram Testados Três Repetições E Três Tratamentos E Unidade De Uma Placa Como...
    Disponible

    11,96 €

Otros libros del autor

  • Conceção e desenvolvimento de uma máquina de ensaio à fadiga para molas de lâminas
    Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar
    A fadiga é uma falha do material ou da máquina devido à ação de tensões repetidas ou flutuantes sobre um elemento da máquina durante um certo número de vezes. Esta falha começa com uma pequena fenda. A fenda inicial é tão ínfima que não pode ser detectada a olho nu e é mesmo muito difícil de localizar numa inspeção por magniflux ou raios X. A fenda desenvolve-se num ponto de de...
    Disponible

    65,43 €

  • Konstruktion und Entwicklung einer Ermüdungsprüfmaschine für Blattfedern
    Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar
    Ermüdung ist ein Material- oder Maschinenversagen, das auf die Einwirkung wiederholter oder schwankender Spannungen auf ein Maschinenelement über eine bestimmte Anzahl von Malen zurückzuführen ist. Dieses Versagen beginnt mit einem kleinen Riss. Der anfängliche Riss ist so winzig, dass er mit dem bloßen Auge nicht zu erkennen ist und auch bei einer Lupen- oder Röntgenprüfung nu...
    Disponible

    65,43 €

  • Conception et développement d’une machine d’essai de fatigue pour ressorts à lames
    Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar
    La fatigue est une défaillance d’un matériau ou d’une machine due à l’action d’une contrainte répétée ou fluctuante sur un élément de machine pendant un certain nombre de temps. Cette défaillance commence par une petite fissure. La fissure initiale est si minuscule qu’elle ne peut être détectée à l’œil nu et qu’elle est même difficile à localiser lors d’une inspection à la loup...
    Disponible

    65,43 €

  • Projektowanie i rozwój maszyny do badań zmęczeniowych sprężyn płytkowych
    Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar
    Zmęczenie to uszkodzenie materiału lub maszyny spowodowane działaniem powtarzających się lub zmiennych naprężeń na element maszyny przez pewną liczbę razy. Uszkodzenie to zaczyna się od niewielkiego pęknięcia. Początkowe pęknięcie jest tak małe, że nie można go wykryć gołym okiem, a nawet jest dość trudne do zlokalizowania w badaniu lupowym lub rentgenowskim. Pęknięcie powstaje...
    Disponible

    65,43 €

  • Progettazione e sviluppo di una macchina per prove di fatica per molle a balestra
    Kunal Shinde / SACHIN CHEDE / Swapnil Ambekar
    La fatica è un cedimento di un materiale o di una macchina dovuto all’azione di sollecitazioni ripetute o fluttuanti su un elemento della macchina per un certo numero di volte. Questo cedimento inizia con una piccola cricca. La cricca iniziale è così minuscola che non può essere rilevata a occhio nudo ed è persino difficile da localizzare in un’ispezione a magniflux o a raggi X...
    Disponible

    65,43 €