Tecnología de los metales (metalurgia)

Tecnología, ingeniería, agricultura / / Tecnología de los metales (metalurgia) (205)

Tecnología, ingeniería, agricultura / / Tecnología de los metales (metalurgia)
Libros Eliminar filtro Tecnología, ingeniería, agricultura Eliminar filtro Eliminar filtro Tecnología de los metales (metalurgia) Eliminar filtro Quitar filtros
  • Intermetallics 2016
    Ana Sofia Ramos
    The combination of low density, high strength, and good corrosion resistance makes intermetallics promising for structural applications, especially at high temperatures and under severe environments. These materials have also potential for functional applications since some intermetallic phases have unique properties, such as shape memory or thermo electric effect. As a result ...
    Disponible

    59,77 €

  • Rice Husk Ash in AA6061 Composites
    Kailash Reddy
    Rice husk ash (RHA) has gained significant attention as a potential reinforcement material in the development of metal matrix composites (MMCs). In particular, the combination of RHA with AA6061, an aluminum alloy, has shown promising results in enhancing the mechanical and thermal properties of the composite material.The incorporation of RHA in AA6061 composites offers numerou...
    Disponible

    34,56 €

  • Mechanical Properties of Al-Mg2Si Alloys Experimental Investigation
    Sundaramoorthy R
    'Mechanical Properties of Al-Mg2Si Alloys: Experimental Investigation' delves into the comprehensive study of Al-Mg2Si alloys, focusing on their mechanical properties through rigorous experimental investigations. This book explores the realm of aluminum alloys, particularly those alloyed with magnesium silicide (Mg2Si), and offers valuable insights into their design and behavio...
    Disponible

    36,82 €

  • Mg-Cr Fillers in Dissimilar FSW Joints
    Sasikumar A
    The book titled 'Mg-Cr Fillers in Dissimilar FSW Joints' by Sasikumar A explores the application of Mg-Cr fillers in the context of dissimilar friction stir welding (FSW) joints. FSW is a solid-state welding technique widely used for joining various metals, and this book specifically focuses on the welding of dissimilar materials, specifically magnesium and chromium alloys.The ...
    Disponible

    35,18 €

  • Introduction to Phase Diagrams in Materials Science and Engineering
    Hiroyasu Saka
    Phase diagrams are a MUST for materials scientists and engineers (MSEs). However, understanding phase diagrams is a difficult task for most MSEs. The audience of this book are young MSEs who start learning phase diagrams and are supposed to become specialists and those who were trained in fields other than materials science and engineering but are involved in research and/or de...
    Disponible

    47,41 €

  • History of the Manufacture of Iron in All Ages
    James Moore Swank
    In this detailed history of iron manufacture, James Moore Swank provides a comprehensive account of the development of iron production in the United States from the colonial period through the late 19th century. He examines the technological advancements and economic forces that drove this industry forward, and discusses the impact of iron manufacture on American society and th...
    Disponible

    41,50 €

  • Procedimientos de laboratorio para la investigación en Metalurgia Extractiva
    Álvaro Aracena Caipa / Paz Fuenzalida Martínez
    'Este libro titulado Procedimientos de laboratorio para la investigación en Metalurgia Extractiva, tiene por objetivo guiar y orientar al investigador en el área de metalurgia o disciplinas asociadas al estudio del procesamiento de minerales, para incentivarlo y proponerle algunos procedimientos experimentales probados y verificados en su mayoría en nuestro Laboratorio de Inves...
    Disponible

    22,88 €

  • Steel
    William Metcalf
    This comprehensive guide to steel is a must-have for anyone working with or interested in the material. The authors cover the history of steel, its properties and uses, and methods for working with it. The work includes many photos, diagrams, and tables to aid understanding.This work has been selected by scholars as being culturally important, and is part of the knowledge base ...
    Disponible

    34,69 €

  • A Study of the Blast Furnace
    Harbison-Walker Refractories Company
    A Study of the Blast Furnace is a comprehensive and practical guide to the design, operation, and maintenance of blast furnaces. This essential resource provides a detailed overview of the blast furnace process, and it includes practical tips and techniques for optimizing performance and reducing costs. Whether you’re a process engineer, operations manager, or maintenance techn...
    Disponible

    34,66 €

  • Der Eisenerzeugung in Böhmen
    Carl J. N. Balling
    Dieses Buch beschäftigt sich mit der Geschichte und Technologie der Eisenproduktion in Böhmen im 19. Jahrhundert. Carl J. N. Balling, ein bekannter Ingenieur und Wissenschaftler, beschreibt in diesem Buch die verschiedenen Methoden und Techniken, die bei der Eisenproduktion eingesetzt wurden. Er bietet einen detaillierten Einblick in die Technologie und die wirtschaftlichen Asp...
    Disponible

    33,79 €

  • Metallurgical Calculations; Volume 1
    Joseph William Richards
    This book provides practical methods for performing calculations in metallurgical engineering. It covers topics such as chemical thermodynamics, reaction kinetics, and material balances.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it.This work is in the 'public domain in the United States of ...
    Disponible

    35,56 €

  • System Der Metallurgie
    Carl Johann Bernhard Karsten
    Dieses umfassende Werk über Metallurgie ist der fünfte Band eines Systems und behandelt die theoretischen und technischen Aspekte der Metallurgie. Es bietet einen historischen und statistischen Überblick über die wichtigsten Metalle, deren Verarbeitung und Anwendungsmöglichkeiten.This work has been selected by scholars as being culturally important, and is part of the knowledge...
    Disponible

    34,63 €

  • The Manufacture of Iron
    M Needham
    First published in 1884, this book provides a comprehensive overview of the techniques and processes involved in the manufacture of iron, from mining and smelting to rolling and finishing. Needham draws on the latest scientific and technological advances of his time to provide a detailed description of each step, as well as the economic and environmental factors that influenced...
    Disponible

    29,58 €

  • Manual of Assaying Gold, Silver, Lead, Copper
    Walter Lee Brown
    Learn the art and science of metalsmithing with this comprehensive guide to assaying gold, silver, lead, and copper. Featuring detailed instructions, illustrations, and formulas, this book is a must-have for aspiring smelters, jewelers, and metallurgists.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as w...
    Disponible

    32,82 €

  • Handbuch Der Metallurgischen Hüttenkunde
    Bruno Kerl
    Dies ist ein Handbuch der metallurgischen Hüttenkunde zur Benutzung bei Vorlesungen und zum Selbststudium. Dies ist der dritte Band des Werkes.This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it.This work is in the 'public domain in the United States of America, and possibly other nations. Within...
    Disponible

    35,39 €

  • Aqueous Metallurgy
    Francis Dakubo
    This book, titled aqueous metallurgy, flotation, and battery recycling with Python, is written for the practicing metallurgical, chemical, environmental, geochemical, mining, microbiologist, and geological engineering students and scientists who want to learn the theory behind most of the processes in aqueous metallurgy. This book is also helpful for engineering students and sc...
    Disponible

    176,42 €

  • South Bend Lathe Works Combined Edition
    South Bend Lathe Works
    Master Precision Metal Working with These Classic ManualsHere are two classic machining manuals from the legendary South Bend Lathe Works. Originally these thorough and well-illustrated instructions were included with each new lathe or shaper purchase shipped from the South Bend manufacturing plant. Today they are still practical instruction manuals also valued for their histor...
    Disponible

    17,66 €

  • How to Run a Lathe
    John Joseph O’Brien / Miles William O’Brien / South Bend Lathe Works
    2021 Hardcover Reprint of 1942 Edition. Full facsimile of the original edition, not reproduced with Optical Recognition Software. South Bend Lathe Works sent out this manual with every Lathe they sold. Profusely illustrated. You get everything you need to set up a lathe and get it running. This is the lathe manual that Dave Gingery raves about. You get eleven chapters: history ...
    Disponible

    17,46 €

  • Barrow Steelworks - Continuous Casting
    Ken E Royall / Stan Henderson
    Since the end of the Second World War (1939-1945), there have been some outstanding technical developments in steelmaking (processes, techniques and practices), which have since been adopted on a worldwide basis. These developments include the use of oxygen in bulk; automation; high-speed rolling and continuous casting. During the 1950s & 60s, the works at Barrow-in-Furness ado...
    Disponible

    22,26 €

  • Metallurgical Coke Making in India (2021)
    Tarun Chatterjee
    This book documents India’s unique journey in becoming the second largest metallurgical coke producer in the world, deploying a unique set of technologies ranging from beehive coke making to state-of-the-art plants producing coke by recovery and non-recovery processes, using both top charging and stamp charging.The intricacies of Indian metallurgical coke-making plants under in...
    Disponible

    48,18 €

  • Hardening and Tempering
    E. R. Markham / ERMarkham
    This vintage book contains a collection of classic articles on the subject of the hardening and tempering in blacksmithing, taking the reader through the processes in a factory setting.First published in 1909, these articles contain a wealth of timeless information regarding the subject’s history. They detail industrial hardening plants, information on chemicals used for heatin...
    Disponible

    31,90 €

  • Practical Forging and Art Smithing
    Thomas F. Googerty / Thomas FGoogerty
    This vintage book contains a comprehensive guide to forging and blacksmithing, originally intended to be used by teachers of industrial arts. It was written by a master craftsman in wrought metal and contains a wealth of useful tips and simple instructions for making a variety of objects and tools. This volume will be of considerable utility to novice metalworkers and would mak...
    Disponible

    32,65 €

  • Blacksmith’s Manual Illustrated
    J. W. Lillico / JWLillico
    This vintage book contains a practical treatise on the common methods of production for blacksmiths, apprentice blacksmiths, engineers, and others. Profusely illustrated and full of helpful tips, this volume provides a elementary introduction to the tools and techniques of the workshop, and is highly recommended for those with little previous experience. Contents include: 'Forg...
    Disponible

    46,16 €

  • Pyrometallurgical Transformation in Mesopotamia from Chalcolithic Sumer to Amorite Babylonia
    Lucas Braddock Chen
    The utilization of metals marked a major transition point in the history of human technology, as man learned to explore the special properties of the material. The field of archaeometallurgy arose not only to study the archaeological characteristics of metal artifacts, but also to research the history of civilization through the lens of metal technologies such as ore mining, sm...
    Disponible

    70,92 €

  • American Iron, 1607-1900
    Robert B Gordon
    Originally published in 1996. By applying their abundant natural resources to ironmaking early in the eighteenth century, Americans soon made themselves felt in world markets. After the Revolution, ironmakers supplied the materials necessary to the building of American industry, pushing the fuel efficiency and productivity of their furnaces far ahead of their European rivals.In...
    Disponible

    62,09 €

  • The Smith’s Work And Classic Blacksmithing Tools (Legacy Edition)
    Paul N. Hasluck / Paul NHasluck
    A Comprehensive Classic Guide for Blacksmithing TechniqueThis deluxe reprint Legacy Edition of Paul N. Hasluck’s The Smith’s Work And Classic Blacksmithing Tools (previously published as “Smith’s Work” in 1904) is full of old-time tips and methods for learning the blacksmithing and metal forging arts and for making your own beautiful metal works and tools in the traditional way...
    Disponible

    34,25 €

  • The Smith’s Work And Classic Blacksmithing Tools (Legacy Edition)
    Paul N. Hasluck / Paul NHasluck
    A Comprehensive Classic Guide for Blacksmithing TechniqueThis deluxe reprint Legacy Edition of Paul N. Hasluck’s The Smith’s Work And Classic Blacksmithing Tools (previously published as “Smith’s Work” in 1904) is full of old-time tips and methods for learning the blacksmithing and metal forging arts and for making your own beautiful metal works and tools in the traditional way...
    Disponible

    20,26 €

  • Introduction to Phase Diagrams in Materials Science and Engineering
    Hiroyasu Saka
    Phase diagrams are a MUST for materials scientists and engineers (MSEs). However, understanding phase diagrams is a difficult task for most MSEs. The audience of this book are young MSEs who start learning phase diagrams and are supposed to become specialists and those who were trained in fields other than materials science and engineering but are involved in research and/or de...
    Disponible

    95,24 €

  • Iron and Steel - A Treatise on the Smelting, Refining, and Mechanical Processes of the Iron and Steel Industry, Including the Chemical and Physical Characteristics of Wrought Iron, Carbon, High-Speed
    Erik Oberg / Franklin Day Jones
    This edition of the 'Machinery’s Reference Series' deals with iron and steel, exploring how they are smelted, refined, and used in various mechanical processes of the iron and steel industry. It also contains chapters on the physical and chemical characteristics of these metals, and which tools they are best used to make based on this. Erik Oberg’s 'Iron and Steel' is perfect f...
    Disponible

    25,16 €

  • Steel - Its Selection, Annealing, Hardening and Tempering
    Edward Russell Markham
    This vintage book contains a detailed treatise on the subject of steel, exploring in particular how it is selected, hardened, and annealed. 'Annealing' refers to a hardening process whereby steel is heated above the re-crystallization temperature and subsequently cooled in a furnace, water, or oil. Tempering is a process that removes 'stress' by heating steel below the re-cryst...
    Disponible

    29,50 €


01 02 03 04 05 06 07