Inicio > Matemáticas y ciencia > Química > Synthesis of carbon nanotubes using Co/CaCO3 as a catalyst
Synthesis of carbon nanotubes using Co/CaCO3 as a catalyst

Synthesis of carbon nanotubes using Co/CaCO3 as a catalyst

Priscila Mululo Madela

93,36 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2025
Materia
Química
ISBN:
9786202458580
93,36 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

In this study, the catalysts 12% (m/m) Co/Al2O3 and x% (m/m) Co/CaCO3 (x=2.5%, 5%, and 12%) were synthesized by the combustion method and tested in the synthesis of carbon nanotubes (CNTs) by the Catalytic Vapor Decomposition (CVD) method. Methane and acetylene were the carbon sources used, and the reaction temperatures were 700 °C for acetylene and 900 °C for methane. The results of Raman spectroscopy and scanning electron microscopy analyses revealed that the CNTs produced with the cobalt catalyst on alumina were of better quality but difficult to purify, as it was not possible to remove the support using the procedures employed. CaCO3, on the other hand, was easily removed by acid treatment. Regarding the yield of the reactions, the cobalt catalyst supported on carbonate was more active, achieving much higher yields than those found for the cobalt catalyst on alumina. The latter proved to be very low (less than 30%).

Artículos relacionados

  • Suzuki-Miyaura Cross-Coupling Reaction and Potential Applications
    Suzuki–Miyaura cross-coupling remains a powerful tool in organic synthesis for C–C bond formation and has various industrial applications, for example, the synthesis of pharmaceuticals and materials. Intensive research efforts are being made into finding ways of improving and expanding the scope of this process, and the development of more efficient catalytic systems for this e...
    Disponible

    67,89 €

  • Catalysis for Low Temperature Fuel Cells
    Today, the development of active and stable catalysts still represents a challenge to overcome in the research field of low temperature fuel cells. Operation at low temperatures demands the utilization of highly active catalysts to reduce the activation energy of the electrochemical reactions involved at the electrodes, and thus obtain practical performances and high efficienci...
    Disponible

    59,74 €

  • Trends in Microextraction Techniques for Sample Preparation
    Micro-extraction techniques in sample preparation are gaining interest among analytical chemists as they comply with green analytical chemistry demands and ensure environmental protection and public safety. Savings in cost and time are considered as valuable benefits by using novel micro-extraction approaches in sample handling. Selectivity, sensitivity and lower detection limi...
    Disponible

    59,87 €

  • Advances and Applications of Nano-antimicrobial Treatments
    Nowadays, great concerns are associated with the resistance demonstrated by many microorganisms towards the conventional antibiotic therapies. The failure of traditional antimicrobials, and the increasing healthcare costs, have encouraged scientific research and the development of novel antimicrobial agents. Particularly, there is a great deal of interest in nanotechnologies an...
    Disponible

    51,68 €

  • Handbook of Research on Uncovering New Methods for Ecosystem Management through Bioremediation
    Kajal Srivastava / Shivom Singh
    Maintaining and preserving the environment is a crucial consideration in an era where climate change and rising sea levels are common knowledge. It is important for researchers and developers alike to explore potential solutions for a steadily warming world. The Handbook of Research on Uncovering New Methods for Ecosystem Management through Bioremediation focuses on the agricul...
  • Structural Design and Properties of Coordination Polymers
    The assembly of organic ligands and metal centres yields coordination polymers, many of which find applications in conductivity, catalysis, magnetism, gas sorption, biological sensing and luminescence. The structure and topology of coordination polymers may be manipulated by changing the reaction conditions, leading to a large variety of structurally and topologically unique pr...
    Disponible

    43,77 €

Otros libros del autor

  • Sintesi di nanotubi di carbonio utilizzando Co/CaCO3 come catalizzatore
    Priscila Mululo Madela
    Nel presente lavoro, i catalizzatori 12 % (m/m) Co/Al2O3 e x % (m/m) Co/CaCO3 (x=2,5 %, 5 % e 12 %) sono stati sintetizzati con il metodo della combustione e testati nella sintesi di nanotubi di carbonio (NTC) con il metodo della decomposizione catalitica del vapore (DCV). Il metano e l’acetilene sono state le fonti di carbonio utilizzate e le temperature di reazione sono state...
    Disponible

    93,43 €

  • Synteza nanorurek węglowych z wykorzystaniem Co/CaCO3 jako katalizatora
    Priscila Mululo Madela
    W niniejszej pracy katalizatory 12 % (m/m) Co/Al2O3 i x % (m/m) Co/CaCO3 (x=2,5 %, 5 % i 12 %) zostały zsyntetyzowane metodą spalania i przetestowane w syntezie nanorurek węglowych (NTC) metodą katalitycznego rozkładu pary (DCV). Jako źródła węgla wykorzystano metan i acetylen, a temperatury reakcji wynosiły 700 °C dla acetylenu i 900 °C dla metanu. Wyniki analiz spektroskopii ...
    Disponible

    93,43 €

  • Synthese von Kohlenstoffnanoröhren unter Verwendung von Co/CaCO3 als Katalysator
    Priscila Mululo Madela
    In der vorliegenden Arbeit wurden die Katalysatoren 12 % (m/m) Co/Al2O3 und x % (m/m) Co/CaCO3 (x=2,5 %, 5 % und 12 %) durch die Verbrennungsmethode synthetisiert und bei der Synthese von Kohlenstoffnanoröhren (CNTs) durch die katalytische Dampfspaltung (KDS) getestet. Als Kohlenstoffquellen wurden Methan und Acetylen verwendet, die Reaktionstemperaturen betrugen 700 °C für Ace...
    Disponible

    93,43 €