Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials

Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials

George C. Sih

428,52 €
IVA incluido
Disponible
Editorial:
Springer Nature B.V.
Año de edición:
2010
ISBN:
9789048178995
428,52 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)
Sobre IBD

Contributors; Foreword; Technical Contributions; Application of virtual testing for obtaining fracture allowable of aerospace and aircracft materials, by B. Farahmand An equivalent block approach to crack growth, by R. Jones, S. Pitt and D. Peng Prediction of fatigue crack growth rates in Ti-6Al-4V alloy, by A. M. Korsunsky, D. Dini and M. J. Walsh Some practical implications of exponential crack growth, by L. Molent, S. Barter and R. Jones Fatigue behaviour of FS,LB and MIG welds of AA6061-T6 and AA6082-T6, by P.M.G.P. Moreira, V. Richter-Trummer and P.M.S.T. de Castro Fatigue Damage from Surface to Bulk, by C.. A. Rodopoulos Microcracking in high temperature low cycle fatigue, by S.L.Mannan and M.Valsan Invariant form of micro-/macro-cracking in fatigue, by G. C. Sih Fatigue crack growth rate of cable-stayed portion of Runyang bridge: Part I-cable crack growth due to disproportionate cable tightening/loosening and traffic loading, by G. C. Sih and X.S. Tang Fatigue crack growth rate of cable-stayed portion of Runyan bridge: Part II-steel wire crack growth due to disproportionate cable tightening/loosening and traffic loading, by G. C. Sih and X.S. Tang Fatigue of small-scale metal materials:from micro-to macro-scale, by G. P. Zhang and Z. G. Wang Assessment of fatigue damage in heterogeneous materials by application of a novel compliance technique, by H. Mughrabi and H. W. Höppel Fatigue crack growth of aircraft aluminum alloys, by Sp. G. Pantelakis and Al Th Kermanidis

Artículos relacionados

  • Recent Advances in Energy Storage Materials and Devices
    Li Lu
    In the Li-ion battery, Ions’ transportation between positive and negative electrodes relies on organic-based electrolyte with a low flammable point. Therefore, use of this type of electrolyte lead to a lot of safety issues. In addition, the potential window of commercially available organic electrolyte is only up to about 4.5V, resulting that those cathode materials with high p...
    Disponible

    132,86 €

  • Surface Engineering Techniques and Applications
    Loredana Santo / Paulo Davim
    Surface engineering includes many facets of materials science that help regulate the function, quality, and safety of products such as automotive, textile, and electronic materials. New technologies are developing to help enhance the surface performance. Surface Engineering Techniques and Applications: Research Advancements provides recent developments in surface engineering te...
  • Technological Applications of Nano-Hybrid Composites
    In the midst of our contemporary and swiftly evolving technological landscape, the pressing issue lies in the need for multifunctional materials that can transcend traditional boundaries and fuel innovation across diverse industries. This demand arises from the relentless pursuit of greater performance, efficiency, and adaptability in sectors ranging from electronics to aerospa...
  • Rheology Step 1
    Annika Sahlström
    This book is covering the basics of rheology and is based on knowledge gained during many years of both practical and theoretical work with rheological challenges in most industrial branches. It serves to help the reader to gain the understanding needed to plan, perform and interpret rheological measurements to study material properties at rest and during flow. This book is bas...
    Disponible

    72,86 €

  • Advancements in Powder Metallurgy
    Advancements in Powder Metallurgy: Processing, Applications, and Properties addresses a critical issue in academic scholarship by providing a comprehensive resource that has been lacking in the field. Existing books often fall short by merely covering the basics of powder preparation, sintering methods, and general applications, leaving scholars with a limited understanding of ...
  • Advancements in Powder Metallurgy
    Advancements in Powder Metallurgy: Processing, Applications, and Properties addresses a critical issue in academic scholarship by providing a comprehensive resource that has been lacking in the field. Existing books often fall short by merely covering the basics of powder preparation, sintering methods, and general applications, leaving scholars with a limited understanding of ...
    Disponible

    274,93 €

Otros libros del autor

  • Experimental evaluation of stress concentration and intensity factors
    George C. Sih
    ...
    Disponible

    285,74 €

  • Proceedings of an International Conference on Dynamic Crack Propagation
    George C. Sih
    The planning meeting for a conference on Dynamic Crack Propagation was held at M.LT. in February 1971 and attended by research workers from several industrial, governmental and academic organizations. It was felt that a more specialized meeting would provide a better opportunity for both U.S. and foreign researchers to exchange their ideas and views o...
    Disponible

    137,77 €

  • Mechanics of Fracture Initiation and Propagation
    George C. Sih
    The assessment of crack initiation and/or propagation has been the subject of many past discussions on fracture mechanics. Depending on how the chosen failure criterion is combined with the solution of a particular theory of continuum mechanics, the outcome could vary over a wide range. Mod­ elling of the material damage process could be elusive if th...
    Disponible

    207,00 €

  • Plates and shells with cracks
    George C. Sih
    This third volume of a series on Mechanies of Fraeture deals with eraeks in plates and shelIs. It was noted in Volume 2 on three-dimensional eraek problems that additional free surfaees can lead to substantial mathematical complexities, often making the analysis unmanageable. The theory of plates and shelIs forms a part of the theory of elasticity in ...
    Disponible

    65,98 €

  • Application of Fracture Mechanics to Materials and Structures
    George C. Sih
    ...
    Disponible

    670,85 €

  • Methods of Analysis and Solutions of Crack Problems
    George C. Sih
    It is weH known that the traditional failure criteria cannot adequately explain failures which occur at a nominal stress level considerably lower than the ultimate strength of the material. The current procedure for predicting the safe loads or safe useful life of a structural member has been evolved around the discipline oflinear fracture mechanics. ...
    Disponible

    267,86 €