Materiały funkcjonalne dla fotokatalizy

Materiały funkcjonalne dla fotokatalizy

IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI

65,55 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2025
ISBN:
9786209128028
65,55 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)
Sobre IBD

Celem niniejszej pracy jest zaprojektowanie i zbadanie złączy opartych na porowatych materiałach półprzewodnikowych α-Fe2O3 i TiO2 przy użyciu metod elektrochemicznych. Początkowo porowaty TiO2 został wytworzony przy użyciu polimeru jako środka strukturyzującego, a jego wpływ na cienkie warstwy TiO2 został przeanalizowany. Temu etapowi towarzyszyły badania strukturalne, morfologiczne i optyczne w celu określenia optymalnych warunków otrzymywania porowatych warstw. Następnie zoptymalizowano tworzenie warstw α-Fe2O3 poprzez elektrodepozycję. Na koniec oceniono wydajność utworzonych materiałów i połączeń, badając degradację modelowego barwnika, błękitu metylenowego, w zależności od rodzaju zastosowanego fotokatalizatora.

Artículos relacionados

  • Recycled Polymers
    Didier Perrin
    The efficient ecodesign of secondary raw materials from recycled multiphase polymer systems is performed through the study of various things, such as:The compatibility of mixtures of recycled polymers where work on knowledge of the miscibility of mixtures depends on the different rates and the nature of the constituents;The aging of recycled polymers in terms of the structuring...
  • Advanced Nanoscale Materials for Thermoelectric Applications
    This Special Issue covers preparations, measurements, devices, and applications based on thermoelectric nanomaterials and summarizes the latest developments towards highly efficient thermoelectric nanomaterials and thermoelectric devices. ...
  • Repair and Strengthening of Existing Reinforced Concrete Structures
    Andreas Lampropoulos
    It is crucial that we strengthen existing structures worldwide, especially in earthquake-prone areas. Recent earthquakes have highlighted the inadequacy of many existing structures, which have been damaged from previous powerful earthquakes and have been designed without code provisions or according to old code provisions that are now obsolete. Furthermore, the majority of exis...
  • Sol-Gel Technology Applied to Materials Science
    Aleksej Zarkov
    Rapid advances in technologies around the globe necessitate the development of new materials, nanostructures, and multicomponent composites with specific chemical and physical properties that can meet the requirements of modern technologies. Using appropriate synthetic approaches is crucial for the preparation of inorganic materials with designed microstructure and properties. ...
  • Functional Polymer Composites
    Functional polymer composites are showing increasing potential as materials in chemistry and materials science. Polymer composites, including nanocomposites, are made via the incorporation of fillers in polymer matrices and offer many advantages. The properties of polymer composites are further improved via the surface modification of fillers or the matrix phase. Currently, the...
  • Feature Papers in Section Biosensors 2023
    Evgeny Katz
    This reprint, based on the Special Issue, provides a general overview of different biosensors, briefly explaining the general approaches to identifying them, their construction, and their performance. A discussion concerning how the required components of biosensors are combined to perform analytical work is presented. Different signal-transducing mechanisms are discussed, part...

Otros libros del autor

  • Materiais funcionais para fotocatálise
    IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI
    O objetivo deste trabalho é conceber e estudar junções baseadas em materiais semicondutores α-Fe2O3 e TiO2 porosos utilizando métodos electroquímicos. Inicialmente, o TiO2 poroso foi produzido usando um polímero como agente estruturante, e sua influência nos filmes finos de TiO2 foi analisada. Esta etapa foi acompanhada de estudos estruturais, morfológicos e ópticos para determ...
    Disponible

    65,55 €

  • Funktionelle Materialien für die Photokatalyse
    IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI
    Ziel dieser Arbeit ist die Gestaltung und Untersuchung von Übergängen aus den Halbleitermaterialien α-Fe2O3 und porösem TiO2 durch elektrochemische Methoden. In einem ersten Schritt wurde die Herstellung von porösem TiO2 mithilfe eines Polymers als Strukturierungsmittel durchgeführt und dessen Einfluss auf die dünnen TiO2-Filme analysiert. Dieser Schritt wurde von strukturellen...
    Disponible

    65,61 €

  • Materiali funzionali per la fotocatalisi
    IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI
    L’obiettivo di questo lavoro è progettare e studiare giunzioni basate su materiali semiconduttori porosi α-Fe2O3 e TiO2 utilizzando metodi elettrochimici. Inizialmente, il TiO2 poroso è stato prodotto utilizzando un polimero come agente strutturante, e la sua influenza sui film sottili di TiO2 è stata analizzata. Questa fase è stata accompagnata da studi strutturali, morfologic...
    Disponible

    65,55 €

  • Functional materials for photocatalysis
    IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI
    The aim of this work is to design and study junctions based on porous α-Fe2O3 and TiO2 semiconductor materials using electrochemical methods. Initially, porous TiO2 was developed using a polymer as a structuring agent, and its influence on TiO2 thin films was analyzed. This step was accompanied by structural, morphological and optical studies to determine the optimum conditions...
    Disponible

    65,49 €

  • Matériaux fonctionnels pour la photocatalyse
    IBTISSEM Ben ASSAKER / RADHOUANE CHTOUROU / ZOUBAIDA LANDOLSI
    L’objectif de ce travail est la conception et l’étude de jonctions à base de matériaux semiconducteurs α-Fe2O3 et TiO2 poreux par des méthodes électrochimiques. Dans un premier temps, l’élaboration de TiO2 poreux a été réalisée à l’aide d’un polymère comme agent structurant, et l’influence de ce dernier sur les films minces de TiO2 a été analysée. Cette étape a été accompagnée ...
    Disponible

    65,49 €