Étude des nanostructures d’hématite pour les applications photovotaïques

Étude des nanostructures d’hématite pour les applications photovotaïques

Hemant Kumar Mulmudi

52,40 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2025
ISBN:
9786208552954
52,40 €
IVA incluido
Disponible

Selecciona una librería:

  • Librería Samer Atenea
  • Librería Aciertas (Toledo)
  • Kálamo Books
  • Librería Perelló (Valencia)
  • Librería Elías (Asturias)
  • Donde los libros
  • Librería Kolima (Madrid)
  • Librería Proteo (Málaga)

Les cellules solaires photoélectrochimiques sont prometteuses en raison de leur faible coût et de leur processus de fabrication. L’oxyde de fer (phase hématite, rouille) peut être utilisé pour former une jonction semi-conducteur/électrolyte afin d’exploiter l’énergie solaire. La bande interdite de l’oxyde de fer étant de 2,2 eV, il est possible d’en extraire un maximum de 12-13 mAcm2. Mais les courtes longueurs de diffusion des trous, de l’ordre de quelques nanomètres, posent un problème pour atteindre cet objectif. Ce travail se concentre sur l’utilisation de nanostructures d’oxyde de fer comme outil pour résoudre ce problème. La méthode de traitement en solution a été utilisée pour synthétiser différentes nanostructures d’oxyde de fer sur des substrats conducteurs tels que l’oxyde d’étain dopé à la farine. Ces nanostructures ont été directement intégrées dans des cellules solaires PEC utilisant un électrolyte iode/iodure. Les limites d’un tel système ont été systématiquement étudiées en mesurant le courant de court-circuit avec une intensité lumineuse variable et la spectroscopie d’impédance.

Artículos relacionados

  • Recycled Polymers
    Didier Perrin
    The efficient ecodesign of secondary raw materials from recycled multiphase polymer systems is performed through the study of various things, such as:The compatibility of mixtures of recycled polymers where work on knowledge of the miscibility of mixtures depends on the different rates and the nature of the constituents;The aging of recycled polymers in terms of the structuring...
    Disponible

    79,51 €

  • Advanced Nanoscale Materials for Thermoelectric Applications
    This Special Issue covers preparations, measurements, devices, and applications based on thermoelectric nanomaterials and summarizes the latest developments towards highly efficient thermoelectric nanomaterials and thermoelectric devices. ...
    Disponible

    60,44 €

  • Repair and Strengthening of Existing Reinforced Concrete Structures
    Andreas Lampropoulos
    It is crucial that we strengthen existing structures worldwide, especially in earthquake-prone areas. Recent earthquakes have highlighted the inadequacy of many existing structures, which have been damaged from previous powerful earthquakes and have been designed without code provisions or according to old code provisions that are now obsolete. Furthermore, the majority of exis...
    Disponible

    98,52 €

  • Sol-Gel Technology Applied to Materials Science
    Aleksej Zarkov
    Rapid advances in technologies around the globe necessitate the development of new materials, nanostructures, and multicomponent composites with specific chemical and physical properties that can meet the requirements of modern technologies. Using appropriate synthetic approaches is crucial for the preparation of inorganic materials with designed microstructure and properties. ...
    Disponible

    69,92 €

  • Functional Polymer Composites
    Functional polymer composites are showing increasing potential as materials in chemistry and materials science. Polymer composites, including nanocomposites, are made via the incorporation of fillers in polymer matrices and offer many advantages. The properties of polymer composites are further improved via the surface modification of fillers or the matrix phase. Currently, the...
    Disponible

    69,97 €

  • Feature Papers in Section Biosensors 2023
    Evgeny Katz
    This reprint, based on the Special Issue, provides a general overview of different biosensors, briefly explaining the general approaches to identifying them, their construction, and their performance. A discussion concerning how the required components of biosensors are combined to perform analytical work is presented. Different signal-transducing mechanisms are discussed, part...
    Disponible

    79,48 €

Otros libros del autor

  • Badanie nanostruktur hematytowych do zastosowań fotowoltaicznych
    Hemant Kumar Mulmudi
    Fotoelektrochemiczne ogniwa słoneczne są obiecujące ze względu na ich niski koszt i proces produkcji. Tlenek żelaza (faza hematytowa, rdza) może być wykorzystywany do tworzenia połączenia półprzewodnika z elektrolitem w celu wykorzystania energii słonecznej. Biorąc pod uwagę pasmo zabronione tlenku żelaza wynoszące 2,2 eV, można z niego uzyskać maksymalnie 12-13 mAcm2. Jednak k...
    Disponible

    52,32 €

  • Untersuchung von Hämatit-Nanostrukturen für photovotaische Anwendungen
    Hemant Kumar Mulmudi
    Photoelektrochemische Solarzellen sind vielversprechend, weil sie kostengünstig sind und sich leicht herstellen lassen. Eisenoxid (Hämatit-Phase, Rost) kann als Halbleiter-Elektrolyt-Verbindung eingesetzt werden, um Sonnenenergie nutzbar zu machen. Bei einer Bandlücke von 2,2 eV des Eisenoxids kann ein Maximum von 12-13 mAcm2 aus ihm gewonnen werden. Die kurzen Diffusionslängen...
    Disponible

    52,40 €

  • Studio di nanostrutture di ematite per applicazioni fotovoltaiche
    Hemant Kumar Mulmudi
    Le celle solari fotoelettrochimiche sono promettenti per il loro basso costo e per il processo di fabbricazione. L’ossido di ferro (fase ematite, ruggine) può essere impiegato per formare una giunzione semiconduttore/elettrolita per sfruttare l’energia solare. Dato un bandgap di 2,2 eV dell’ossido di ferro, è possibile estrarre da esso un massimo di 12-13 mAcm2 . Tuttavia, le b...
    Disponible

    52,32 €

  • Investigação de nanoestruturas de hematite para aplicações fotovoltaicas
    Hemant Kumar Mulmudi
    As células solares fotoelectroquímicas são promissoras devido ao seu baixo custo e processo de fabrico. O óxido de ferro (fase hematite, ferrugem) pode ser utilizado na formação de uma junção semicondutor/eletrólito para aproveitar a energia solar. Dado que o óxido de ferro tem um bandgap de 2,2 eV, é possível extrair dele um máximo de 12-13 mAcm2. Mas os curtos comprimentos de...
    Disponible

    52,32 €