LIBROS DEL AUTOR: hrishiraj ranjan

7 resultados para LIBROS DEL AUTOR: hrishiraj ranjan

hrishiraj ranjan Eliminar filtro Quitar filtros
  • Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief deals with externally finned tubes, their geometric parameters, Reynolds number, dimensionless variables, friction factor, plain plate fins on round tubes, the effect of fin spacing, correlations, pain individually finned tubes, circular fins with staggered tubes, low integral fin tubes, wavy fin, enhanced plate  fin geometries with round tubes, Offset Strip Fins, co...
    Disponible

    68,30 €

  • Electric Fields, Additives and Simultaneous Heat and Mass Transfer in Heat Transfer Enhancement
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief deals with electrode design and placement, enhancement of both liquid and gas flow, vapor space condensation, in-tube condensation, falling film evaporation, correlations. It further provides a fundamental understanding of boiling and condensation, pool boiling, critical heat flux, convective vaporization, additives for single-phase liquids like solid particles, gas ...
    Disponible

    68,12 €

  • Insert Devices and Integral Roughness in Heat Transfer Enhancement
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief describes heat transfer and pressure drop in heat transfer enhancement by insert devices and integral roughness. The authors deal with twisted-tape insert laminar and turbulent flow in tubes and annuli in smooth tubes and rough tubes, segmented twisted-tape inserts, displaced enhancement devices, wire coil inserts, extended surface inserts and tangential injection de...
    Disponible

    68,30 €

  • Two-Phase Heat Transfer Enhancement
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief concerns heat transfer and pressure drop in heat transfer enhancement for boiling and condensation. The authors divide their topic into six areas: abrasive treatment and coatings, combined structured and porous surfaces, basic principles of boiling mechanism, vapor space condensation, convective vaporization, and forced condensation inside tubes. Within this framewor...
    Disponible

    68,11 €

  • Introduction to Enhanced Heat Transfer
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief stands as a primer for heat transfer fundamentals in heat transfer enhancement devices, the definition of heat transfer area, passive and active enhancement techniques and their potential and benefits and commercial applications. It further examines techniques and modes of heat transfer like single-phase flow and two-phase flow, natural and forced convection, radiati...
    Disponible

    68,06 €

  • Performance Evaluation Criteria in Heat Transfer Enhancement
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief deals with Performance Evaluation Criteria (PEC) for heat exchangers, single phase flow, objective function and constraints, algebraic formulation, constant flow rate, fixed flow area, thermal resistance, heat exchanger effectiveness, relations for St and f, finned tube banks, variations of PEC, reduced exchanger flow rate, exergy based PEC, PEC for two-phase heat ex...
    Disponible

    68,08 €

  • Heat Transfer Enhancement in Plate and Fin Extended Surfaces
    Hrishiraj Ranjan / Madhu Sruthi Emani / Sujoy Kumar Saha
    This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver ...
    Disponible

    68,20 €